Our Lithuanian customer Popaboat installed the 48V 150Ah lithium marine batteries in parallel to power their newly designed catamarans. We tailored the battery size based on the internal design of the catamarans and offered the customer a 3D schematic diagram for confirmation.
Two 48V 200Ah power wall lithium batteries EC1000 are connected in parallel and configured with Deye inverter, building a 20kWh solar energy storage system. The customer was satisfied with this solution and said it could meet daily electricity demand without worrying about power outages.
The 2 x 48V 200Ah Polinovel lithium batteries are installed to power two 48V electric motors (10KW peak power, 14HP, run 3650 PRM) and other house loads on his 30’ catamaran liveaboard sailboat. The batteries are charged by 12KWH solar panels and 300W wind turbines through a charger controller and M
"Durable structure" is the main reason the client chose Polinovel as it would be sturdy enough to take over rough terrain for his trailer. We tailored a 12V 600Ah lifepo4 battery size with M8 terminals on top. The new lithium battery needs to fit the original installation tray that was for 4x120Ah b
Our client use Polinovel AF Series 4 units x 12V 300Ah lithium battery to replace the original 12 x 1000ah Sonneschien 2 v OPZV gel cells. Series-connecting gets a 48V 300Ah battery system. The series-connected 48V 30Ah lithium battery is run with a 5000 watt Victron Multi Plus inverter to power the
Our client installed the 48V 100Ah lithium battery to drive the motor for a 48 Volt Yamaha Golf Buggy with an Output of 2.6Kw and a rating of 30min. Polinovel tailored the battery size for drop-in replacement of 4 Lead Acid Batteries that are removed and give a space of ( L*W*H ) of (110x60x30) cm.